The Best Longboards for Sliding (Review & Buying Guide) in 2022
Enjoy the glory of the glide with these top-rated longboards for sliding.
The Drive and its partners may earn a commission if you purchase a product through one of our links. Read more.
If your longboarding route involves hilly terrain, then you already know the merit of longboard sliding. An effective way to slow down, it is often an easier way to stop than just air braking. Keeping you in control of the speed and letting you come to a halt quickly, longboard sliding is about more than convenience — it’s about safety. While you can technically slide on any longboard, some get the job done much better than others. Just like your car needs good brakes, you can stand to benefit from a longboard designed specifically to slide. Usually, it’s a matter of the board lying lower to the ground and featuring wheels that are fairly high on the hardness scale. Even for expert riders, it can be tricky to find the right board. So, we’ve gathered all the best longboards for sliding available in the guide below.
Fish Skateboards Downhill Longboard
Featuring a streamlined design, this longboard has a powerful deck and flexible wheel design to enable easy sliding.
- Deck made of eight layers of hardwood
- Wheels are suspended on durable trucks
- The board surface is textured for good traction
- Trucks are vulnerable to damage from rust
- Wheels require ongoing maintenance when used for sliding
- Board requires indoor storage
Leeyoo Drop Through Longboard
With a sleek appearance and slim deck, the front and rear of this longboard simplify steering while encouraging balance and stability.
- Comes at an affordable price point
- Touts a stylish design
- Hardness of the wheels is well-suited towards sliding
- Designed for young riders
- Available in relatively few color options
- Wheels can be hard to replace
- Only suitable for younger riders
Hana Pintail Longboard
Touting a unique structure, the pintail design of this longboard lends an edge to sliding. Its eight-layer deck encourages stability while the wheel design absorbs shock.
- Wheel trucks balance weight well
- Riders can slide from almost any position
- Fairly simple longboard to maintain
- Hardwood deck fortified with bamboo
- Better suited towards experienced longboard riders
- Wheels are quite hard
- Less suited to commuting, limiting longboard versatility
Benefits of Longboards For Sliding
- Makes braking easier. Sure, braking with your foot is important, but when you are traveling at faster speeds it can be challenging at best. A longboard that you can maneuver to let the wheels spin independently makes it easier (and safer) to bring the longboard to a stop.
- Allows you to ride in more environments. Being able to brake in more than one way makes it safer to use the longboard in more situations. Especially in urban environments with a lot of downhill pavement, being able to slide to a stop can improve overall safety and let you ride in comfort wherever you are.
- Improves core muscle strength. When sliding, the crouched position required to reach the front of the board naturally engages the rider's core muscles. As with any muscle group, practicing using this facet of upper body strength causes a lot of fitness advantages.
- Facilitates balance. Bending down to reach the tip of the board and slide requires the rider to maintain position from various angles. Due to this challenge, balance naturally improves. This skill can translate to multiple aspects of daily life.
- Can extend wheels’ shelf life. Because longboard sliding involves letting the wheels spin independently of the pavement, instead of using friction to brake, it limits the wear and tear on the wheels themselves. As a result, you don’t have to perform maintenance as frequently.
Types of Longboards For Sliding
Why Trust Us
Our reviews are driven by a combination of hands-on testing, expert input, “wisdom of the crowd” assessments from actual buyers, and our own expertise. We always aim to offer genuine, accurate guides to help you find the best picks.Learn more
This type of longboard features trucks that attach to the base of the deck directly. As a result, it is easier for the longboard rider to make sharp turns. It’s easy to spot this kind of board since it sits higher off the ground than most other types. While this distance makes sliding easier (so long as the wheels are hard enough) it also can result in shakiness when traveling at higher speeds.
An easy type of longboard to spot, these feature raised deck ends (both at the front and the back). The curved results in the main part of the deck resting closer to the ground. Since most of the deck is between the trucks, you can maneuver the wheels more easily. So long as the wheels are on the right side of the hardness scale, this longboard type is well-suited to sliding.
The namesake of this type of longboard is in the baseplate location. Found at the top of the longboard deck, the hanger (the part that connects to the wheels) drops through the structure. As a result, the board sits closer to the ground. This reduces the shakiness of the ride and lets you travel at faster speeds. However, when sliding, it won’t take sharp turns as well-meaning the rider needs to plan the slide a few seconds earlier.
Hitting the longboard scene in 2018, this brand quickly evolved into a reputed name in the riding world. It offers a whole host of skateboard and longboard supplies, including one of its most popular options, the Minority Downhill Maple Longboard for its sleek design and good balance.
A popular manufacturer of custom skating supplies, FISH Skateboards is based in Poland. The company focuses exclusively on longboards and skateboards. One of its leading offerings is the Fish Skateboards Through Deck Longboard for its easy-cruising design.
Originally a tech company, Kryptonics opened its doors in 1965, creating its first skateboard almost ten years later. Since that time, it has used polyurethane to evolve the wheels on both skateboards and longboards. Among the best-favored selections from this brand is the Kryptonics Complete Longboardfor its unique blend of style and utility.
Longboard For Sliding Pricing
- Under $50: Longboards in this range tend to be fairly basic and most often are of a drop-through type. Though useful, these boards tend to be less durable.
- Between $50 and $100: Most longboards fall in this category, with options of every type. You can find high-grade selections that are maneuverable and long-lasting.
- $100 and up: Higher-end boards are usually priced in this range. Often, the added price is reflected in stylish accents and a sleek deck.
The wheels on your longboard are possibly the most essential component of any longboard for sliding. Made out of polyurethane, the wheels encase ball bearings which reduce the contact surface area on the interior. In most cases, this part comes pre-lubricated. While the wheels come in various sizes, the most important part of this feature is the hardness level. Harder wheels are better-suited to sliding since they can most easily spin independently of the ground.
Referring to the board itself, the shape and density of the deck differ based on the board type. Just about all decks are constructed out of layered hardwood, usually maple. Most decks feature at least eight layers of wood, sealed with a polymer to prevent warping and mildew. The deck size varies, as does the shape of the front and rear parts (where it connects to the wheels). It’s important to be able to grab the deck more easily to achieve a proper slide.
Connecting the wheels to the deck are the trucks, making them a critical component to the overall function of a sliding longboard. The trucks are most often made of aluminum alloy to offer strength and prevent rust. The angle of the trucks makes a big difference in the stability of the ride. Trucks are responsible for controlling the stiffness of motion and for absorbing bumps in the road, acting similarly to shocks on motor vehicles.
- Style. Once you’ve determined that the longboard meets all the essential criteria in terms of features, you can shift your focus to the style of the board itself. Determine what type of board you are most comfortable riding. Think about how easily you will be able to grab the board and command a slide when you make your pick.
- Wheel replacements. Over time, wheels will eventually wear down and eventually require a replacement. Be sure that you can easily find compatible wheels on the market. The most common size is 70 millimeters, though there are other sizes too. Usually, switching out wheels is pretty easy, so long as you can find a replacement part.
- Adjustability. Often, the trucks on a longboard will be maneuverable over an angular range. If you want a versatile longboard, check that the trucks have more than one setting. While the most common kingpin angle is 50 degrees, you can also find models with 30-degree angles that are better for traveling long distances.
- Weight. The weight threshold of a longboard depends on all components working together to improve the tensile strength of the ride. Weight is technically a measure of force, referring to mass interacting with gravity. As a result, you need a bit of wiggle room to account for the extra force of impact when landing for a jump. Most accommodate at least 200 pounds, though some models support over 300 pounds.
- Maintenance. The final consideration is the upkeep requirements of the board itself. Consider the storage requirements. Most boards need to be kept indoors to prevent environmental damage. Even with this, however, the deck still requires attention, as do the wheels and trucks. That said, all boards need a different level of maintenance, so be sure that you can keep up with the demand.
Best Longboards for Sliding Reviews & Recommendations 2021
If you are looking for a longboard that will make both cruising and sliding easier, check out the Fish Skateboards Downhill Longboard. With a 41-inch deck, the drop-through longboard lets you achieve a quality slide with minimal effort. The deck is constructed out of eight layers of maple hardwood and offers a weight threshold of 330 pounds (easily enough to support adult riders). The polyurethane wheels incorporate well-lubricated bearings that facilitate a smooth ride overall. Connecting to aluminum trucks that measure seven inches across, the steel axle adds a level of sturdiness to their function. The board comes pre-assembled, meaning you can get to riding right away. With a slip-resistant surface to encourage good traction and balance, this sliding longboard is excellent for riders of all experience levels.
It’s worth noting that while most of the board is tough against the elements, the steel axles are moderately vulnerable to rust. Keep them dry, and store the board indoors to avoid issues with this component.
If you want to take up longboarding without breaking the bank, consider the Leyoo Drop Through Longboard for its stylish design and attractive price point. The board is 41-inches long and features a textured deck to foster balance and help you keep a good grip. At nine inches across on the main part of the board, it lets you ride stably even as a beginner. The board is built to perform stunts (including sliding), largely thanks to the forgiving trucks that absorb shock well. Connecting to tough wheels, the hardy polymer material helps you achieve spin without struggling with traction on the ground. Made out of high-grade materials including hardwood maple for the deck and aluminum alloy trucks, this board touts an affordable price point without foregoing quality.
Keep in mind that, while the deck and trucks are fairly standard, the wheels are only 50 millimeters, meaning it might be trickier to find a replacement down the line. Proper maintenance and a bit of research should mitigate any potential issues.
If you are an experienced rider that is looking to balance style with function, take a look at the Hana Pintail Longboard. It has a unique design and top-of-the-line components. Built to cruise just as easily as it can slide, all parts of the board work together to offer a comfortable riding experience. The deck is constructed mainly out of maple, though is fortified with bamboo. This adds strength and gives it a sleek appearance. The top is finished with gritty sand to offer good traction. Meeting the deck through durable, 50-degree kingpin trucks, are the 70-millimeter polyurethane wheels. These spin easily, making the ideal amount of contact with the ground to facilitate easy sliding and braking. Great for both cruising and tricks, this premium board is geared towards long-time riders.
Bear in mind that, though this longboard is high-grade, this does come with a moderately higher price tag. However, for dedicated riders, the quality material and smooth performance make it well worth the investment.
When your longboarding goal is to have fun above all else, it only makes sense to have a ride that fits your style. The Kryptonics Spongebob Longboard is a terrific fit for those in pursuit of amusement during their rides. The three-foot deck gives you enough room to maneuver easily, whether cruising or learning tricks. With a decorated surface done up in the style of a beloved Nickelodeon character, this board is suitable for riders of all ages. Though the design might be goofy, the function isn’t. The deck features eight layers of hardwood maple and the polyurethane wheels are hard enough to slide with ease. Fortified with high-grade bearings and supportive trucks, this board makes it both easy and entertaining to slide on your longboard.
It warrants a mention that, while the board is perfectly functional, it only supports up to 220 pounds. While this is usually sufficient, it is worth keeping in mind if you plan to perform any heavy-duty tricks.
Though you can technically slide on any surface, you are most likely to use this skill when going downhill. The Minority Downhill Longboard is built to help you maneuver easily, with all parts of the ride working together well. It touts a 40-inch deck, crafted exclusively out of hardwood maple. Featuring a gritty surface for traction, it is fairly easy to keep your balance on this board (even as a beginner). Beneath the deck are the seven-inch kingpin trucks, made out of aluminum material. Adjustable over a five-degree range, you can shift the angle from 50 to 45 degrees. These lead to 78A polyurethane wheels that include well-lubricated bearings to absorb any bumps in the pavement. Taken together, the board makes sliding to a stop both straightforward and fun.
It’s worth noting that, while the board itself works well for sliding, the wheels aren’t high on the hardness scale. As a result, they may wear down more quickly, so it can help to have a spare close by.
Have you always been a skateboarder but are now looking to expand your skillset? If that’s the case, consider the Whome Small Carving Longboard. At only 31 inches, it can foster an easy transition between the two riding styles. Alternatively, it is a good tool for teaching younger longboard riders. The deck is made out of hardwood; and, despite its small size, can hold onto 198 pounds. Featuring 80A polyurethane wheels, it balances traction with the ability to spin during a slide. Offering a stable riding experience, the relatively firm trucks make it easy to ride both downhill and on flat pavement. With versatility as the core value of the design, this board works well for everything from carving to tricks to sliding.
One thing to keep in mind is that, though it is a good learning tool, the small size of this board makes it a less than a permanent solution. That said, for newer riders or those transitioning from skateboards, it is a solid choice.
Is sliding more of a means to an end when it comes to your riding style? If so, then the Seething Complete Cruiser Longboard is a worthy candidate. The 42-inch deck features a pintail design, meant primarily for smooth riding and long distances. However, with the sturdy trucks and hardy wheels, this board can slide excellently. With a multi-layer maple deck that is gritted for stability, it is easy to do everything from tricks to gliding with this board. The well-lubricated bearings inside the polyurethane wheels lend sturdiness while the casted bushings help limit traction. Touting a stylish look that’s modeled after the beach aesthetic, this longboard comes pre-assembled and ready to go. Plus, since it supports up to 330 pounds, it is a safe option for all types of longboarding activities.
It’s worth a mention that the board, while versatile, isn’t designed with a focus on sliding. So long as you slide as a braking tool, not a trick, however, it remains a worthwhile investment for longboard enthusiasts.
- Store your longboard indoors to prevent damage to the trucks and the deck.
- Always wear a helmet when you ride, especially if you are newer to the sport.
- Wear padding when you are just starting since sliding can result in falls.
- Practice makes perfect with any trick, so carve out some time each day to grow your skills.
- Start by crouching while you ride to develop balance and then learn to take sharp turns.
- Learn to slide on the longboard in a low-traffic area to mitigate the risk of injury.
- Maintain the board regularly by checking on the trucks and the wheels to ensure they are in good working condition.
- Choose harder wheels for sliding so that you aren’t fighting against friction with the ground.
Q: Do you need special wheels to slide on a longboard?
The most important aspect of sliding wheels is the hardness level. Since sliding requires the wheels to move independently of the ground, a softer polymer will give too much traction. Harder wheels with well-lubricated bearings make it easier to slide.
Q: How do you slide stop on a longboard?
Keeping your balance, crouch down and grab the side of the deck. As you turn, leverage the deck at an upward angle (away from the ground). Do this as you turn the board using your body weight. This lets you slide along the ground without actually gripping it.
Q: Other than sliding, what else can you do on a longboard?
The possibilities are virtually endless. From dancing to tricks, you can use a longboard for choreographed activities. Conversely, you can cruise on a longboard, using it to commute or as a low-impact type of exercise.