---
title: "This New Six-Speed Manual Could Fit in the C8 Corvette and Ford Mustang GTD"
date: "2025-11-04"
modified: "2025-11-04"
authors:
  - name: "Andrew P. Collins"
    job_title: "Executive Editor"
    link: "https://www.thedrive.com/authors/andrew-p-collins"
url: "https://www.thedrive.com/news/this-new-six-speed-manual-could-fit-in-the-c8-corvette-and-ford-mustang-gtd"
categories:
  - "Aftermarket"
  - "Car Tech"
  - "Chevrolet News"
  - "Ford News"
  - "GM News"
  - "News"
  - "News by Brand"
tags:
  - "Corvette"
  - "Mustang"
  - "sports car"
  - "Supercar"
---

# This New Six-Speed Manual Could Fit in the C8 Corvette and Ford Mustang GTD

![Corvette with possible manual transmission](<https://www.thedrive.com/wp-content/uploads/2025/11/corvette-manual.jpg>)
*\<em\>Chevrolet, TREMEC, edited by the author\</em\>*

TREMEC, a major OEM and aftermarket transmission supplier, has announced something that I know folks have dreamed about: A high-performance six-speed manual that could fit in a [C8 Corvette](<https://www.thedrive.com/category/chevrolet-corvette>). More specifically, this new transaxle uses the same basic housing shape and mounting points as TREMEC's TR-9080 eight-speed dual-clutch automatic that's standard in all new 'Vettes. That transaxle is also used in the [Ford Mustang GTD](<https://www.thedrive.com/car-reviews/2025-ford-mustang-gtd-review>).

To be clear: Don't count on Chevy or Ford adding a manual transmission to the factory options list on either of the cars we just mentioned. TREMEC is pitching this new six-speed directly to custom-car builders and racing teams. "TREMEC designed the transmission to utilize the TR-9080 DCT mounting points and a similar case profile. This allows builders to use already available factory Corvette components for easier installation," the brand stated in a [press release](<https://tremec-blog.com/new-tremec-6-speed-manual-transaxle-redefines-custom-performance/>).

TREMEC is stylized in all caps because [it's a pseudo-acronym](<https://tremec.com/where-it-all-started-tremec-transmissions/>) for *TRansmisiones y Equipos MECánicos*—it was founded in Mexico in 1964. The company started doing truck transmissions but is now well-established in the high-performance space. [TREMEC designed the eight-speed dual-clutch TR-9080](<https://tremec.com/engineering-the-c8-corvette/>) transaxle used in the Corvette and Mustang GTD. A transmission and a transaxle are conceptually the same thing, but mechanically different. If you're unfamiliar with these terms, basically, a transmission is what gets engine power to the differential, axles, and ultimately the wheels. But when you have a transaxle, the trans and diff are one unit.

![TREMEC TR-9080 transaxle as visible in cutaway image of C8 Corvette](<https://www.thedrive.com/wp-content/uploads/2025/11/corvette-transaxle-cutaway.jpg>)
*Here you can see the TR-9080 as it sits in the C8. *Chevrolet**

No shipping date or price has been announced yet for TREMEC's new six-speed, but it's not a concept. TREMEC's release makes it pretty clear that this is going into production. And while it should physically fit in a C8 or GTD, getting it to work properly would require a custom engine control software and, of course, fitting a shifter and clutch pedal in the cabin, which might be a significant challenge with the mid-engine Corvette. Here are some images of the new transaxle:

- ![](<https://www.thedrive.com/wp-content/uploads/2025/11/trans3.jpg>)
- ![](<https://www.thedrive.com/wp-content/uploads/2025/11/trans2.jpg>)
- ![](<https://www.thedrive.com/wp-content/uploads/2025/11/trans1.jpg>)

[][][]

I suspect this will mostly be bought for custom racing vehicles and maybe a few big-dollar custom street cars, not work its way through OEM validation to become a factory option. But still, it's cool to hear about.

Here are the specs TREMEC has released so far:

## New TREMEC 6MT Transaxle Specs

- TR-9080 DCT mounting points
- Designed to be used in a variety of builds and engine combinations
- Estimated input torque rating of 800 ft-lbs of torque, 1,000 horsepower and an impressive maximum engine RPM capability of 8,600
- Gear shifts controlled via cable that connects to the shift mechanism on the left side of the transaxle
- mechanical limited-slip
- Multi-plate clutch with a concentric slave cylinder for clutch actuation
- Gear lubrication and cooling supplied via geroter pump driven off the transaxle’s input shaft
- Gear ratios (table below) chosen to make the new transaxle compatible with the widest array of engines/power outputs and RPM ranges as possible

![Gear ratio table.](<https://www.thedrive.com/wp-content/uploads/2025/11/tremec-6MT-transaxle-gear-ratio-table.jpg>)
*TREMEC 6MT transaxle gear ratios. *TREMEC, edited by the author**

*Got a tip? Drop us a note at tips@thedrive.com.*

## Author
As Executive Editor, Andrew touches everything on the site from daily news coverage to feature stories, sponsored content, product reviews, road testing vehicles, ecommerce, and more. He's held pretty much every role there is to have at an automotive news site and has been with The Drive's publisher Recurrent since 2020. Andrew's a lifetime gearhead and longtime writer with a particularly strong penchant for road trips, off-road adventures, and archaic vehicles. His passions outside of the automotive world include skiing, obsolete video games, and his dog Bramble who occationally helps review cars.

### Author social links  
[Instagram](<https://instagram.com/andrewatlarge>)  
[LinkedIn](<https://www.linkedin.com/in/andrewpetercollins/>)