---
title: "Hot-Rod 1976 Chrysler Slant-Six Now Powers a Whole House"
date: "2026-08-19"
modified: "2026-08-19"
authors:
  - name: "Caleb Jacobs"
    job_title: "Senior Editor"
    link: "https://www.thedrive.com/authors/caleb-jacobs"
url: "https://www.thedrive.com/news/hot-rod-1976-chrysler-slant-six-now-powers-a-whole-house"
categories:
  - "News"
  - "Watch This"
---

# Hot-Rod 1976 Chrysler Slant-Six Now Powers a Whole House

![225-cubic-inch Chrysler slant-six engine used in a genset](<https://www.thedrive.com/wp-content/uploads/2026/08/Slant-Six-Genset-Hero.jpg>)
*\<em\>SmallEngineMechanic via YouTube\</em\>*

A gearhead's favorite pastimes include imagining engine swaps for their project cars. Naturally, though, there are limitations. Engine size is perhaps the greatest factor, as it's hard to stuff [a V12](<https://www.thedrive.com/news/watch-a-homebuilt-v12-push-a-land-speed-car-to-244-mph-at-9500-rpm>) into [a Miata](<https://www.thedrive.com/news/mazdas-working-on-a-new-mx-5-miata-and-it-will-weigh-less-than-2200-pounds-tds>), while you also have to consider cylinder configuration, electronics compatibility, and more. But there is an application for horsepower and torque that's practically unlimited—a true blank slate—[and that's gensets](<https://www.thedrive.com/news/buy-this-2384-cubic-inch-detroit-diesel-v16-generator-and-power-your-hometown>). That's what makes this person's choice of a 225-cubic-inch [Chrysler](<https://www.thedrive.com/category/chrysler-news>) slant-six all the more interesting.

You can say a lot about this unit, but first and foremost, we have to talk about how pretty it is. [The unorthodox generator engine](<https://www.thedrive.com/news/culture/a-120-turbo-cut-this-slant-six-dodge-trucks-0-60-time-in-half>), which powered all types of workhorse vehicles between 1959 and 1991, sits neatly inside its wheeled cart. [SmallEngineMechanic](<https://www.youtube.com/@SmallEngineMechanic>) on YouTube built the whole-home backup power device, painting it blue to match the rest of the equipment while wiring it meticulously. Seriously, just look inside that cabinet.

![225-cubic-inch Chrysler slant-six engine used in a genset](<https://www.thedrive.com/wp-content/uploads/2026/08/Screenshot-2026-08-19-at-10.48.09-AM.png>)

![225-cubic-inch Chrysler slant-six engine used in a genset](<https://www.thedrive.com/wp-content/uploads/2026/08/Screenshot-2026-08-19-at-10.47.42-AM.png>)

![225-cubic-inch Chrysler slant-six engine used in a genset](<https://www.thedrive.com/wp-content/uploads/2026/08/Screenshot-2026-08-19-at-10.47.15-AM.png>)

![225-cubic-inch Chrysler slant-six engine used in a genset](<https://www.thedrive.com/wp-content/uploads/2026/08/Screenshot-2026-08-19-at-10.51.08-AM.png>)

![225-cubic-inch Chrysler slant-six engine used in a genset](<https://www.thedrive.com/wp-content/uploads/2026/08/Screenshot-2026-08-19-at-10.50.30-AM.png>)

And then there's the hardware. Standing on one side of the genset, you see the engine's character trait on full display: The block tilted 30 degrees off-center. Walk to the other side, and you find it's been converted to run throttle-body injection with Holley Sniper EFI. Whereas lots of generators run propane or natural gas, this one is fueled by gasoline, seemingly for convenience's sake.

The cylinders were bored .060 over to go along with new pistons, rings, bearings, and a rebuilt head. It also enjoys a fresh oil pump and water pump—key components for a stationary power plant.

It's unclear how much oomph this particular slant-six makes, but factory stock examples made anywhere between 145 and 180 horsepower. Either way, it's able to support up to 30 kilowatts of backup power here—[way more than a Ford F-150 Lightning's 9.6 kilowatts](<https://www.thedrive.com/news/the-ford-f-150-lightning-can-charge-five-cars-at-once>)—all while running pretty darn quietly. You can hardly hear the exhaust, as the radiator fan is really the loudest component of all. That might be the opposite of what you want in a hot rod, but if the engine is powering your air conditioner while you sleep, quieter is better.

In the video below, you can watch the SmallEngineMechanic make a house call to learn why the genset isn't running right. Turns out, a faulty ignition coil was causing it to spit and sputter after 20 minutes or so of run time. Replacing that coil and adjusting the governor gain was all it took to get the unit in shape, as they tested it with a mobile military load bank.

https://www.youtube.com/watch?v=m-Ieyyt0FcE

I won't pretend to know everything about gensets—this has a single-phase Stamford alternator and a Basler DGC 2020 digital controller, for those who care—but I'm just chuffed to see the Chrysler slant-six still in service. Sure, engines like these deserve a break every once in a while, but they were made to work.

*Got a tip or question for the author? Contact them directly: caleb@thedrive.com*

## Author
Caleb Jacobs is The Drive’s senior editor. When he’s not searching for stories or poring over copy, he’s usually driving his dump truck or wishing it was running so he could drive it. He was born and raised in the Missouri Ozarks, and he lives there today with his family.

### Author social links  
[LinkedIn](<https://www.linkedin.com/in/caleb-jacobs-319323119>)  
[Instagram](<https://instagram.com/calebjwords>)  
[Twitter](<https://twitter.com/calebjacobs0611>)