--- title: "2020+ Ford Super Duty Makes 632 HP With Just a Turbo and a Tune—No Deletes" date: "2024-02-28" modified: "2024-02-28" authors: - name: "Caleb Jacobs" job_title: "Senior Editor" link: "https://www.thedrive.com/authors/caleb-jacobs" url: "https://www.thedrive.com/news/2020-ford-super-duty-makes-632-hp-with-just-a-turbo-and-a-tune-no-deletes" categories: - "Aftermarket" - "Car Tech" - "Ford News" - "News" - "News by Brand" - "Trucks" tags: - "Ford" - "pickup" - "super duty" --- # 2020+ Ford Super Duty Makes 632 HP With Just a Turbo and a Tune—No Deletes ![]() *\PPEI\* The commonly held belief is you can't make more power with newer diesel trucks unless you [strip the emissions equipment](). Sure, that's the quickest and simplest way to do it, but [it's also illegal]() in case you haven't heard. That's why I'm writing about this 2021 Ford Super Duty with just a 64-millimeter turbo from Ryan's Diesel Service and a PPEI tune. The 6.7-liter Power Stroke now lays down 632 horsepower and 1,230 pound-feet of torque on the dyno while retaining the EGR, DPF, and everything else. Those are huge gains in both categories as the truck is rated at 475 hp and 1,050 lb-ft from the factory. PPEI founder Kory Willis [said on Instagram]() that the truck made 448 hp at the tire in stock form, which is surprisingly close to the quoted crank power numbers. And now this truck is significantly more potent than a new Super Duty with the high-output 6.7-liter, which makes a nice, round 500 hp and 1,200 lb-ft of torque. > [View this post on Instagram]() > [A post shared by Kory Willis (@kory\_ppei)]() PPEI didn't hit 632 hp on its first try, of course. It took a series of tweaks—mainly to ignition timing and boost parameters—to safely hit that peak. And Willis says it could make even more power if they weren't also trying to stay close to the stock emissions output. The point of all this is to develop a package that increases power significantly while still passing smog tests in California and other CARB states. To be clear, this tune and turbo combo isn't CARB-ready just yet. It still requires a CARB Executive Order number, which takes a lot of testing on the manufacturers' end. PPEI is confident it will pass these tests as it apparently keeps emissions within 10% of the OEM's standards. And better yet, because the NOx numbers have barely changed, it supposedly doesn't slurp more diesel exhaust fluid than stock. > [View this post on Instagram]() > [A post shared by Kory Willis (@kory\_ppei)]() Tuning modern diesel engines with the emissions systems in place is a tough game. It requires a lot of hands-on testing as past know-how with emissions-absent trucks just won't cut it. Adjustments must be made carefully so they don't spike tailpipe emissions or force excessive diesel particulate filter regens, and in general, there's way more working against tuners than in the past. To this point, few have done it with success, though [the EPA has made it clear that compliance is the only way forward]() if companies want to avoid millions or even billions of dollars in fines. Here's hoping we see more clean tuning like this. Diesel performance is still a huge area of interest, but it needs to be done legally. If PPEI and Ryan's Diesel Service can pass this setup, it opens the door for more. *Got a tip or question for the author? Contact them directly: caleb@thedrive.com* ## Author Caleb Jacobs is The Drive’s senior editor. When he’s not searching for stories or poring over copy, he’s usually driving his dump truck or wishing it was running so he could drive it. He was born and raised in the Missouri Ozarks, and he lives there today with his family. ### Author social links [LinkedIn]() [Instagram]() [Twitter]()