--- title: "The Titanium 140 Welder I’m Using to Make Massive Upgrades to my ‘69 Charger Is On Sale at Harbor Freight" description: "I've been using the Titanium 140 MIG to tackle serious suspension work. Harbor Freight's current sale is a no-brainer." date: "2024-03-29" modified: "2024-03-29" authors: - name: "Hank O'Hop" job_title: "Contributor" link: "https://www.thedrive.com/authors/hank-ohop" url: "https://www.thedrive.com/guides-and-gear/deal-harbor-freight-sale-titanium-mig-welder" categories: - "Deals" - "News" - "The Garage" - "Tools" --- # The Titanium 140 Welder I’m Using to Make Massive Upgrades to my ‘69 Charger Is On Sale at Harbor Freight ![Harbor Freight Titanium 140 MIG Welder Deal]() *\Hank O'Hop\* It's time to let the cat out of the bag. I've been hard at work making some serious upgrades to my [1969 Dodge Charger project]() with [Heidts Suspension](). We're talking a full-on chassis overhaul that brings the [suspension at both ends]() to modern standards. As of today, I'll be finishing up the [4-link conversion]() at the rear of the car. This portion of the project required a lot of welding, and the [Titanium 140 Welder]() I used to get it done is currently on sale for $379.99 at Harbor Freight. Now, I'm not a "good" welder, but this machine is undoubtedly what I needed to take my skills to the next level. Up to this point, I've been using the [Chicago Electric flux core welder]() to revive my '69 Charger. It will do a lot for beginner welders, but I had major anxiety about taking on a suspension fabrication job with my current skill set. That is until I started plugging away with the [Titanium 140](). This machine is a major upgrade in every way, and is a solid investment for folks who want to take their welding projects up a notch, but can't justify a pro-priced machine. It runs smoother, lays stronger welds, and, because it's not limited to flux-cored wire, it can produce much better-looking results than the entry-level machine I'm used to. For the record, it'll weld up to 5/16-inch steel, runs on a 120V power supply, and can weld mild steel, stainless steel, and aluminum with [the optional spool gun](). ![Titanium Welder Heidts 4-Link Install]() Honestly, now that I have the [Titanium 140](), I'm dying to take on more hardcore welding projects, and I am even considering [tearing the Charger back apart]() to redo everything to the best of my ability. It's a no-brainer to take advantage of this sale, and it may even be worthwhile to bump up to the [Titanium 170](), which is also on sale for $499.99. I get it if you want to wait for more information, though. Stay tuned for my full review of the [Titanium 140 welder](). Also, keep an eye out for the Heidts Suspension saga. It's been a ton of work and a ton of fun so far, and a multi-part series covering everything from the installation to an in-depth review is coming soon. Check the list below for more savings from Harbor Freight. - [Titanium MIG 140 Professional Welder]() for $379.99 - [Titanium MIG 170 Professional Welder ]()for $499.99 - [Vulcan Heavy Duty Large Welding Cabinet]() for $399.99 - [Vulcan Omnipro 220 Industrial Multiprocess Welder]() for $999.99 - [Vulcan ProTIG™ 205 Industrial Welde]()[r]() for $999.99 - [Central Pneumatic 2-1/2-Gallon Air Pressure Paint Ta]()[nk]() for $69.99 - [Central Pneumatic 1-1/2-Gallon Gravity-Feed Texture Air Spray Gun]() for $19.99 - [U.S. General Two-Shelf Steel Service Cart]() for $69.99 - [Hercules Heavy-]()[Duty]()[ Professional Bench ]()[Grinder]() for $169.99 - [Pittsburgh 800-Pound Low-Lift Transmission Jack]() for $174.99 ## Author Hank is a former Commerce Editor at The Drive. ### Author social links [LinkedIn]() [Instagram]()